HP Color LaserJet 5550 Printer series - Manual (Page 96)

7. If the printer displays Tray X , press to change the size and type
configuration.
8. The size menu appears.
9. Press to highlight ANY SIZE.
10. Press to select ANY SIZE.
11. The type menu appears.
12. Press to highlight ANY TYPE.
13. Press to select ANY TYPE.
14. The printer displays Tray X ANY SIZE ANY TYPE. Press to accept the size/type
settings and exit the message. The tray is ready for use.
Loading Tray 1 when the same paper is used for multiple
print jobs
Follow this procedure if Tray 1 continues to be loaded with the same type of paper and the
paper is not removed from the tray between jobs. This procedure may also increase the
printer performance when printing from Tray 1.
CAUTION To avoid jams, never add or remove a tray during printing.
1. Before loading the paper, from the Control panel, press the M
ENU
key to enter the MENUS.
2. Press or to highlight PAPER HANDLING.
3. Press to display PAPER HANDLING menu.
4. Press or to highlight TRAY 1 SIZE.
5. Press to display the TRAY 1 SIZE values.
6. Press or to highlight the correct size.
7. Press to select the size.
Note If selecting CUSTOM, also select the unit of measure, the X and the Y dimensions.
8. Press or to highlight TRAY 1 TYPE.
9. Press to display the TRAY 1 TYPE values.
10. Press or to highlight the correct type.
11. Press to select the type.
12. Press M
ENU
to exit MENUS.
82 Chapter 4 Printing tasks ENWW