HP Integrity BL870c Server-Blade - Manual (Page 49)

On the DMP Monarch, the SYSSET command can restore the primary parameters (using the
secondary parameters from the first blade) or can restore the secondary parameters on all blades
in the domain (using the primary parameters from the Blade Link module).
On other MMPs, the SYSSET command can only restore the secondary parameters on blades in
the specific partition. SYSSET cannot restore the primary parameters on the Blade Link, and cannot
restore secondary parameters on blades in other partitions.
After the Blade Link has been replaced, the administrator should run SYSSET on the DMP Monarch.
After a blade has been replaced, the administrator should run SYSSET on the Monarch of the
partition containing the blade. This may be the DMP Monarch or Monarch within another partition,
depending on the partition configuration and the specific blade that was replaced.
For further information on SYSSET, please see the HP Integrity iLO Users Guide at http://
h20000.www2.hp.com/bc/docs/support/SupportManual/c02111169/c02111169.pdf and
the HP Integrity BL860c i4, BL870c i4 & BL890c i4 Server Blade HP User Service Guide at http://
www.hp.com/go/Blades-docs. http://www.hp.com/go/Blades-docs.
SYSSETcommand usage 49