HP Integrity BL870c Server-Blade - Manual (Page 30)

To access the system console of a partition using the GUI, select the iLO link of the partition (Left
Pane), and then click on the Remote Serial Console Link.
Figure 13 Remote Serial Console Link
System settings at EFI
The system settings must be considered and changed appropriately when scaling up, scaling down,
or when partitions are changed using the iLO. The following table provides system settings and
their values in modified or new partitions.
Table 2 System settings
Case: New Partition Case: Modified Partition
Monarch/Auxiliary
in Unchanged
Partition
System
Settings
Auxiliary in
New Partition
Monarch of
New
Partition
Auxiliary
Added to
Modified
Partition
Auxiliary in
Modified
Partition
Monarch of
Modified Partition
Default (On) No change No change Hyper
Threading
Default (MostlyNUMA) No change No change Memory
Interleaving
All processors
active
All
processors
active
All processors
active
No change No change No change Deconfigured
CPUs (for
any
reason)*
All DIMMs
active
All DIMMs
active
All DIMMs
active
No change No change No change Deconfigured
DIMMs
Cleared Cleared Cleared Cleared Cleared No change Error Logs
Factory Defaults No change No change UEFI
Variables
30 System server configuration and booting within an nPartition