HP Integrity BL870c Server-Blade - Manual (Page 47)

Example 1 Blade 2 Faulted, Initial AAAA -> ABCC
NPAR
Current nPartition Configuration:
Bay 5 6 7 8
---------------------------------------------------------------------
nPartition : A A A A
Domain MP : yes - - -
Power Off : yes ??? - -
nPartition Unlocked : - - - -
ICH Present : yes ??? yes yes
nPartition Menu:
Current -> AAAA - One 4-Blade System (default)
---- - Two 2-Blade nPartitions
---- - One 2-Blade nPartition, and Two 1-Blade nPartitions
ABCC - Two 1-Blade nPartitions, and One 2-Blade nPartition
ABCD - Four 1-Blade nPartitions
Note: Some configurations are not available because:
Unable to determine the power state of the blade in bay 6
Enter new value, or [Q] to Quit: abcc
abcc
** CONFIGURATION WARNING **
The system may not operate or operation may be degraded.
The problem(s) below should be remedied:
Unable to determine ICH presence on blade in bay 6
New nPartition Configuration (* marks modified systems):
Bay 5 6 7 8
---------------------------------------------------------------------
nPartition : * A * B * C * C
Confirm? (Y/[N]): y
y
WARNING: iLO failed to initialize partition lock on the blade in bay 6.
Partition locks should be checked after iLO restarts.
-> nPartition Configuration has been updated.
-> iLO will now reset on all modified systems...
Note: System environment variables may be cleared on all modified systems
for the nPartition configuration to take effect. This configuration change
may take several minutes to appear on other manageability user interfaces.
-> iLO reset succeeded.
Replacing a blade 47