beautypg.com

HP ProLiant DL320e Gen8 v2-Server User Manual

Page 43

background image

Hardware options installation 43

o

Two-bay LFF drive model (using the HP 250 W Integrated Power Supply)

o

Four-bay SFF drive model (using the HP 750 W CS -48 V DC Power Supply)

7.

Connect the optical drive SATA Y-cable:

a.

Connect the common end of the Y-cable to the optical drive.

b.

Connect the power end of the Y-cable to the power supply four-pin (1x4) cable.

c.

Route the data end of the Y-cable through the cable management partition, and then connect the
cable to the system board SATA connector.

d.

Secure the excess length of the Y-cable on the front left corner of the power supply: