Hardware options installation, Introduction, Security bezel option – HP ProLiant DL320e Gen8 v2-Server User Manual
Page 34: Drive options
![background image](/manuals/398722/34/background.png)
Hardware options installation 34
Hardware options installation
Introduction
If more than one option is being installed, read the installation instructions for all the hardware options and
identify similar steps to streamline the installation process.
WARNING:
To reduce the risk of personal injury from hot surfaces, allow the drives and the
internal system components to cool before touching them.
CAUTION:
To prevent damage to electrical components, properly ground the server before
beginning any installation procedure. Improper grounding can cause electrostatic discharge.
Security bezel option
The security bezel helps prevent unauthorized physical access to the front panel components. Install the
security bezel and then lock it with the key provided with the kit.
The security bezel is only supported in servers that have the quick-release lever type rack ear option
(PN 725269-001) installed.
Drive options
The server supports up to two LFF non-hot-plug or hot-plug drives and up to four SFF hot-plug drives.
The embedded storage controller supports SATA drive installation. For SAS drive installation, install the
storage controller card option kit. The storage controller card option supports both SATA and SAS drives.