HP ProLiant DL320e Gen8 v2-Server - Manual (Page 42)

Hardware options installation 42
Optical drive option
For more information about product features, specifications, options, configurations, and compatibility, see
the product QuickSpecs on the HP Product Bulletin website (
http://www.hp.com/go/productbulletin ).
To install the component:
1. Power down the server (on page 14 ).
2. Remove the power from the server:
a. Disconnect the power cord from the power source.
b. Disconnect the power cord from the server.
3. Do one of the following:
o Extend the server from the rack (on page 14 ).
o Remove the server from the rack (on page 16 ).
4. Remove the access panel (on page 17 ).
5. Remove the optical drive blank:
a. Pull up the optical drive blank release latch.
b. Remove the optical drive blank.
Retain the blank for future use.
6. Install the optical drive into the bay, and then secure it with the screw: