HP ProLiant DL320e Gen8 v2-Server - Manual (Page 37)

Hardware options installation 37
1. Remove the drive blank.
2. Prepare the drive.
3. Install the drive.
4. Determine the status of the drive from the drive LED definitions (" Hot-plug drive LED definitions " on page
11 ).
To configure arrays, see the HP Smart Storage Administrator User Guide on the HP website
(
http://www.hp.com/go/smartstorage/docs ).
Controller options
The server ships with an embedded Smart Array B120i controller. For more information about the controller
and its features, see the HP Dynamic Smart Array RAID Controller User Guide on the HP website
(
http://www.hp.com/go/smartstorage/docs ).