HP Officejet 6210v All-in-One Printer - Manual (Page 58)

Other equipment/services
sharing your fax line Recommended fax setup
for parallel-type phone
systems Recommended fax setup
for serial-type phone
systems
(You answered Yes to
questions 4, 5, and 7 only.)
Case A: Separate fax line (no voice calls received)
If you have a separate phone line on which you receive no voice calls, and you have
no other equipment connected on this phone line, set up your HP all-in-one as
described in this section.
Back view of the HP all-in-one
1 Telephone wall jack
2 Phone cord supplied in the box with your HP all-in-one connected to the "1-LINE" port
To set up your HP all-in-one with a separate fax line
1 Using the phone cord supplied in the box with your HP all-in-one, connect one
end to your telephone wall jack, then connect the other end to the port labeled "1-
LINE" on the back of your HP all-in-one.
Caution If you do not use the supplied cord to connect from the
telephone wall jack to your HP all-in-one, you might not be able to fax
successfully. This special phone cord is different from the phone cords
you might already have in your home or office. If the supplied phone cord
is too short, see
The phone cord that came with my HP all-in-one is not
long enough for information on extending it.
2 Set up the HP all-in-one to answer incoming calls automatically. Press the Auto
Answer button until the light is on.
3 (Optional) Change the Rings to Answer setting to one ring or two rings.
For information on changing this setting, see Set the number of rings before
answering .
4 Run a fax test. For information, see Test your fax setup .
When the phone rings, your HP all-in-one will answer automatically after the number
of rings you set in the
Rings to Answer setting. Then it will begin emitting fax
reception tones to the sending fax machine and receive the fax.
(continued)
User Guide 55