HP Officejet 6210v All-in-One Printer - Manual (Page 40)

Paper type Control panel setting
HP Premium Paper Premium Inkjet
Other inkjet paper Premium Inkjet
HP Professional Brochure & Flyer Paper (Glossy) Brochure Glossy
HP Professional Brochure & Flyer Paper (Matte) Brochure Matte
HP Premium or Premium Plus Inkjet
Transparency Film Transparency
Other transparency film Transparency
Plain Hagaki Plain Paper
Glossy Hagaki Premium Photo
L (Japan only) Premium Photo
Increase copy speed or quality
The HP all-in-one provides three options that affect copy speed and quality:
●
Best produces the highest quality for all paper and eliminates the banding
(striping) effect that sometimes occurs in solid areas. Best copies more slowly
than the other quality settings.
● Normal delivers high-quality output and is the recommended setting for most of
your copying. Normal copies faster than Best .
● Fast copies faster than the Normal setting. The text is comparable to the quality
of the Normal setting, but the graphics might be lower quality. The Fast setting
uses less ink and extends the life of your print cartridges.
To change the copy quality from the control panel
1 Make sure you have paper loaded in the input tray.
2 Load your original face down on the right front corner of the glass or face up in
the document feeder tray.
If you use the document feeder tray, place the pages so that the top of the
document goes in first.
3 In the Copy area, press Quality until you illuminate the light next to a quality
setting.
4 Press Start Copy Black or Start Copy Color .
Change default copy settings
When you change copy settings from the control panel, the settings apply only to the
current copy job. To apply copy settings to all future copy jobs, you can save the
settings as defaults.
When you change copy settings from the control panel or the HP Director, the
settings apply only to the current copy job. To apply copy settings to all future copy
jobs, you can save the settings as defaults.
(continued)
User Guide 37