HP Officejet 6210v All-in-One Printer User Manual
Page 42
2
Load your letter- or A4-sized originals in the document feeder tray. Place the
pages so that the top of the document goes in first.
3
Press
Start Copy Black
.
Make a 10 by 15 cm (4 by 6 inch) borderless copy of a
photo
For the best quality when copying a photo, load photo paper in the input tray and
change your copy settings for the correct paper type and photo enhancement. You
might also want to use the photo print cartridge for superior print quality. With the tri-
color and photo print cartridges installed, you have a six-ink system. See
for more information.
To copy a photo from the control panel
1
Load 10 by 15 cm (4 by 6 inch) photo paper in the input tray.
Tip
When making borderless copies, you must have photo paper (or other
specialty paper) loaded.
2
Load your original photo face down on the right front corner of the glass.
Position the photo on the glass so the long edge of the photo is along the front
edge of the glass.
3
Press
Start Copy Color
.
The HP all-in-one makes a 10 by 15 cm (4 by 6 inch) borderless copy of your
original photo, as shown below.
Tip
If the output is not borderless, then set the paper size to
10x15 cm
Borderless
or
4x6 Borderless
, set the paper type to
Photo Paper
, set the
Photo
enhancement, and then try again.
For more information on setting the paper size, see
.
For information on setting the paper type, see
.
For information on setting the
Photo
enhancement, see
.
Copy a 10 by 15 cm (4 by 6 inch) photo onto a full-size
page
You can use the
Fill Entire Page
setting to enlarge or reduce your original to fill the
printable area of the paper size loaded in the input tray. In this example,
Fill Entire
Page
is used to enlarge a 10 by 15 cm (4 by 6 inch) photo to create a full-size
borderless copy. When copying a photo, you might want to use the photo print
cartridge for superior print quality. With the tri-color and photo print cartridges
installed, you have a six-ink system. See
for more
information.
User Guide
39