Choose which connection method to use, Connect directly to a computer (windows) – HP Designjet T610 Printer series User Manual
Page 20
Choose which connection method to use
The following methods can be used to connect your printer.
Connection type
Speed
Cable length
Other factors
USB 2.0
Very fast
Short (5 m = 16 ft)
A certified USB 2.0 cable (as provided with
the printer) is necessary for reliable
communication.
Jetdirect print server
(optional accessory)
Moderate; varies
according to network
traffic
Long (100 m = 328 ft)
Requires extra equipment (switches)
Provides additional features
See
for
more details
NOTE:
The speed of any network connection depends on all components used in the network, which
can include network interface cards, hubs, routers, switches, and cables. If any one of these components
cannot operate at high speed, you will have a low-speed connection. The speed of your network
connection can also be affected by the total amount of traffic from other devices on the network.
Connect directly to a computer (Windows)
You can connect your printer directly to a computer by using the printer's built-in USB 2.0 socket
(supported under Windows 2000, Windows XP, and later versions of Windows).
1.
Do not connect the computer to the printer yet. You must first install the printer driver software
on the computer, as follows.
2.
Insert the HP Start-Up Kit DVD into your DVD drive. If the DVD does not start automatically, run
the START.EXE program in the root folder of the DVD.
3.
Click Install. The printer drivers, HP Easy Printer Care, and HP Color Center are installed.
4.
Follow the instructions on your screen to set up the printer. The following notes help you to
understand the screens and make appropriate choices.
●
When asked how the printer is connected, select Connected directly to this computer.
●
If you would like to share the printer with other people connected to your network, press
the Printer Properties button in the Ready to Install window, then select the Sharing tab
and enter the name under which the printer will be shared.
●
When prompted to do so, connect your computer to the printer with a certified USB cable
(provided with the printer). Ensure that the printer is turned on.
NOTE:
You may complete the installation without connecting your printer if you prefer. To
do so, check the box marked I want to connect my printer after completing the setup
wizard.
NOTE:
The use of non-certified USB cables can lead to connectivity problems. Only cables
certified by the USB Implementor's Forum (
should be used with this
printer.
10
Chapter 2 Installing the software
ENWW
In
stalling th
e software