HP Designjet T610 Printer series - Manual (Page 101)

CAUTION: Printhead replacement must be performed with the printer powered on.
1.
Press the Menu key to return to the main menu and select the Ink menu icon , then Replace
printheads.
2. The printer moves the carriage into the correct position.
CAUTION: If the carriage is left in the removal position for more than three minutes without
inserting or removing any printheads, it tries to move back to its normal position in the right-hand
end.
3. When the carriage has stopped moving, the front-panel display asks you to open the window.
4. Locate the carriage on the right side of the printer.
5. Pull the handle up and toward you to release the wire loop.
ENWW Remove a printhead 91
In
k and
p
rin
th
eads