HP Designjet T610 Printer series - Manual (Page 127)

● For heavyweight coated papers (<200 g/m 2 ), select paper type Bond and Coated > Heavyweight
Coated Paper.
● For cockle-free very thick coated papers (> 200 g/m 2 ), select paper type Bond and Coated >
Super Heavyweight Coated Paper.
CAUTION: Only use this option if you are sure your paper does not wrinkle when printed.
Photographic paper
For photographic paper, select paper type Photo Paper > Photo Matte Paper.
HP Banners with Tyvek®
For HP Banners with Tyvek®, select paper type Photo Paper > Photo Gloss Paper.
Black ink is easily removed when touched
This happens when your paper is incompatible with matte black ink. To use non-matte black ink, select
paper type Photo Paper > Photo Gloss Paper.
After printing, the paper has wrinkles or there is too much ink
This happens when too much ink is used. To use less ink, select a thinner category. Matte paper
categories from thinnest to thickest are:
● Plain Paper
● Coated Paper
● Heavyweight Coated Paper
● Super Heavyweight Coated Paper
For other image quality problems, see Troubleshooting print-quality issues on page 123 .
The paper has jammed
When a paper jam occurs, you normally see the Possible paper jam message in the front-panel display.
1. Power off the printer at the front panel and also switch it off at the rear.
ENWW The paper has jammed 117
Paper issu
es