HP SAN Virtualization Services Platform - Manual (Page 54)

ListMigrations command
Syntax
ListMigrations [ -Template StartOfGroupName ]
Description
Requests a list of migration groups according to the specified root (template) name. If the root
name is not specified, all groups are returned.
ManageMigration command
Syntax
ManageMigration -Group GroupName 1|2|3|4
Description
Manages a migration.
NOTE: Allow up to two minutes for the command to fully take effect.
Opcode: 1—Pause migration task; 2—Resume migration task; 3—Abort migration task; 4—Delete
migration task group
MigrateVirtualDisk command
Syntax
MigrateVirtualDisk -Group GroupName, -VirtualDisk SourceVirtualDisk, ~
-AuxVirtualDisk auxilaryVirtualDiskName, ~
-StoragePool poolName, -Priority 1|2|3,
[-Thin 0|1 ,] -timeout 900
Description
Migrates a virtual disk. The default priority is high, and the command always uses the default
priority, regardless of the priority value. The auxilaryVirtualDiskName is the temporary
volume that will become the backup volume after the migration.
The Priority argument has no significance, and should be treated as optional.
Data Path Module commands
ChangeActiveDpm command
Syntax
ChangeActiveDpm -VDGroup | -VirtualDisk | -Snapshot | -SyncGroup ObjectName
Description
For each object under the Data Path Module (DPM) configuration, a pair of primary and secondary
DPMs are defined. At any time, one DPM is the active for communications with the VSM object.
This command allows failover between the two DPMs.
Examples
ChangeActiveDpm -VirtualDisk “MyVdisk”
ChangeActiveDpm -VDGroup “MyVDisk”
54 Using the VSM command line interface