HP SAN Virtualization Services Platform - Manual (Page 53)

Description
Requests a list of synchronous mirror PiTs on a specified synchronous mirror group. You may provide
the root (start) of the synchronous mirror PiT name, or the full name. If the root name is not specified,
all PiTs of this synchronous mirror group are returned.
ResumeSyncMirrorAllForce command
Syntax
ResumeSyncMirrorAllForce
Description
Force resumes all synchronous mirror groups (for example, after a site failure).
ResumeSyncMirrorGroup command
Syntax
ResumeSyncMirrorGroup -Group SyncMirrorGroupName
Description
Resumes the synchronization of a synchronous mirror group (for example, after a failure). If a
synchronous mirror group fails for any reason, it needs to be resumed once the cause is resolved.
This is usually done automatically, so this command is seldomly used.
ResumeSyncMirrorGroupForce command
Syntax
ResumeSyncMirrorGroupForce -Group SyncMirrorGroupName
Description
Force resumes a synchronous mirror group (for example, after a site failure).
ResyncMirrorGroup command
Syntax
ResyncMirrorGroup -Group SyncMirrorGroupName
Description
Resynchronizes a previously failed synchronous mirror group. When one or more tasks (not groups)
have failed, this command is sent manually once the cause is resolved.
Migration commands
GetMigrationInfo command
Syntax
GetMigrationInfo -Group MigrationGroupName
Description
Gets migration task information.
CLI command guidance 53