HP XC System 3.x Software - Manual (Page 33)

2 Using the System
This chapter describes the tasks and commands that the general user must know to use the
system. It addresses the following topics:
• “Logging In to the System” (page 33)
• “Overview of Launching and Managing Jobs” (page 33)
• “Performing Other Common User Tasks” (page 35)
• “Getting System Help and Information” (page 36)
2.1 Logging In to the System
Logging in to an HP XC system is similar to logging in to any standard Linux system. You can
only login on nodes that have the login
role ; those nodes are enabled for logins.
2.1.1 LVS Login Routing
The HP XC system uses the Linux Virtual Server ( LVS ) facility to present a set of login nodes
with a single cluster name. When you log in to the system, LVS automatically routes your login
request to an available login node on the system. LVS load balances login sessions across the
login nodes and improves the availability of login access. When you log in to the HP XC system,
you do not have to know specific node names to log in, only the HP XC system's cluster name.
2.1.2 Using the Secure Shell to Log In
Secure Shell ( ssh ) is the preferred method for accessing the HP XC system.
Typically, you access the HP XC system using the ssh command to get a login shell or to execute
commands. For example:
$ ssh user-name@system-name
user-name@system-name's password:
The ssh service also allows file transfer using the scp or sftp commands over the same port as
ssh .
The typical r* UNIX commands, such as rlogin, rsh, and rcp, are not installed on an HP XC
system by default because of their inherent insecurity. The ssh command transfers all login and
password information in an encrypted form instead of the plaintext form used by the r* UNIX
commands (as well as telnet and ftp).
If you want to use ssh without password prompting, you must set up ssh authentication keys.
See ssh(1) for information about using ssh authentication keys.
The Secure Shell is further discussed in “Enabling Remote Execution with OpenSSH” (page 117) .
You can bypass the need to enter a login and password each time you log in by updating the
ssh
keys. The ssh_create_shared_keys command, used on a one-time basis, updates the
appropriate ssh key files in your $HOME/.ssh directory, provided:
• You have a user account on the HP XC system.
• Your home directory is mounted on all the nodes to which you log in or on which you launch
jobs.
Ensure that you deny write permission on your home directory to the group and others; otherwise
the ssh command . The following command accomplishes that for you:
$ chmod go -w $HOME
2.2 Overview of Launching and Managing Jobs
This section provides a brief description of some of the many ways to launch jobs, manage jobs,
and get information about jobs on an HP XC system. This section is intended only as a quick
2.1 Logging In to the System 33