HP Modular Cooling System Options - Manual (Page 26)

Web interface 26
• Proceed without importing the certificate by clicking Yes at the Security Alert window. You continue to
receive the Security Alert each time you log in until you import the certificate. Your data is still encrypted.
• Exit and import the certificate into your browser from a file provided by the administrator.
a. Click No at the Security Alert window.
b. Obtain an exported certificate file from the administrator.
NOTE: If using Internet Explorer, you can manually import the file into the browser by clicking
Tools>Internet Options>Content>Certificates>Import.
Establishing a secure session for Mozilla
The first time you browse to the management module, the Secure Session screen appears. To ensure a secure
connection, verify that you are browsing to the desired management module:
1. Click Examine Certificate.
2. Verify that the name in the Issued To field is the name or IP address of your management module.
3. Perform any other steps necessary to verify the identity of the management module.
4. After verifying the management module, do one of the following:
a. Click either Accept this certificate permanently or Accept this certificate temporarily for this session.
b. Click OK.
NOTE: If using Mozilla, you can manually import the file into the browser by clicking
File>Preferences>Certificates>Privacy & Security>Manage Certificates>Authorities>Import.
Alarms/Warnings tab
This screen enables the Admin to change alarm and warning settings for the management module.
To change the alarm and warning settings:
1. Select to enable or disable the alarm relay from the Alarm Relay radio buttons. This setting affects all
alarms and warnings, except for the Server Intake Temperature.
o Select Enable to allow the alarm relay when a temperature alarm is generated.