Initial setup menu, Networking and i/o – HP LaserJet M9059 Multifunction Printer series User Manual

Page 40

Initial Setup menu

Administration > Initial Setup

The

Initial Setup

menu contains the sub-menus shown:

●

Networking and I/O

●

Fax Setup

●

E-mail Setup

NOTE:

Values shown with "(default)" are the factory-default values. Some menu items have no default.

Networking and I/O

Administration > Initial Setup > Networking and I/O

Table 2-9

Networking and I/O

Menu item

Sub-menu item

Values

Description

I/O Timeout

Select a value in the
range. The factory default
setting is 15 seconds.

I/O timeout refers to the elapsed time before a print job
fails. If the stream of data that the device receives for
a print job gets interrupted, this setting indicates how
long the device will wait before it reports that the job
has failed.

Embedded Jetdirect

See

Table 2-10 Jetdirect menus on page 26

for the list of options.

EIO Jetdirect

Table 2-10

Jetdirect menus

Menu item

Sub-menu item

Values and Description

TCP/IP

Enable

Off

: Disable the TCP/IP protocol.

(default): Enable the TCP/IP protocol.

Host Name

An alphanumeric string, up to 32 characters, used to
identify the device. This name is listed on the
HP Jetdirect configuration page. The default host name
is NPIxxxxxx, where xxxxxx is the last six digits of the
LAN hardware (MAC) address.

Chapter 2 Control panel

ENWW