Enww solve common macintosh problems 227 – HP LaserJet M9059 Multifunction Printer series User Manual
Page 241
The printer driver does not automatically set up your selected printer in the Print Center or Printer Setup Utility.
Cause
Solution
The Postscript Printer Description (PPD) file is corrupt.
Delete the PPD file from the following hard-drive folder: Library/
Printers/PPDs/Contents/Resources/
where
you are using. Reinstall the software. See the getting started guide
for instructions.
The interface cable might be defective or of poor quality.
Replace the interface cable. Make sure to use a high-quality cable.
A print job was not sent to the printer that you wanted.
Cause
Solution
The print queue might be stopped.
Restart the print queue. Open print monitor and select Start Jobs.
The wrong printer name or IP address is being used. Another printer
with the same or similar name, IP address, or Rendezvous host name
might have received your print job.
Print a configuration page in order to check the printer name, IP
address, or Rendezvous host name. Verify that the name, IP address,
or Rendezvous host name on the configuration page matches the
printer name, IP address, or Rendezvous host name in the Print
Center or Printer Setup Utility.
An encapsulated postscript (EPS) file does not print with the correct fonts.
Cause
Solution
This problem occurs with some programs.
●
Try downloading the fonts that are contained in the EPS file to
the printer before printing.
●
Send the file in ASCII format instead of binary encoding.
You are unable to print from a third-party USB card.
Cause
Solution
This error occurs when the software for USB printers is not
installed.
When adding a third-party USB card, you might need the Apple USB
Adapter Card Support software. The most current version of this
software is available from the Apple Web site.
Table 12-1
Problems with Mac OS X (continued)
ENWW
Solve common Macintosh problems 227