Staple documents – HP LaserJet M9059 Multifunction Printer series User Manual
Page 114
Staple documents
NOTE:
Stapling features are only available if the stapler/stacker or multifunction finisher are attached
to the MFP.
Set the stapler at the control panel for printed jobs
You can usually select the stapler in your software program or printer driver, although some options
might be available only in the printer driver. See
Change printer-driver settings for Windows
for more information. Where and how you make selections depends on your program or
driver. If the stapler cannot be selected in the program or printer driver, it can be selected using the MFP
control panel.
1.
Scroll to and touch
Administration
.
2.
Scroll to and touch
Device Behavior
.
3.
Scroll to and touch
Stapler/Stacker
or
Multifunct. Finisher
.
4.
Touch
Staple
.
5.
Touch the staple option you want to use.
NOTE:
Selecting the stapler at the printer control panel changes the default setting to
Staple
. It is
possible that all print jobs will be stapled. However, settings that are changed in the printer driver override
settings that are changed at the control panel.
Set the stapler at the control panel for all copy jobs
NOTE:
The following procedure changes the default setting for all copy jobs.
1.
Scroll to and touch
Administration
.
2.
Touch
Default Job Options
.
3.
Touch
Default Copy Options
.
4.
Touch
Staple/Collate
.
5.
Touch
Staple
.
6.
Touch the staple option you want to use.
Set the stapler at the control panel for a single copy job
NOTE:
The following procedure sets the stapling option for only the current copy job.
1.
Touch
Copy
.
2.
Touch
Staple/Collate
.
3.
Touch the staple option you want to use.
100 Chapter 7 Print tasks
ENWW