HP LaserJet M3027 Multifunction Printer series - Manual (Page 169)

Control panel message Description Recommended action
support/LJM3027mfp or www.hp.com/
support/LJM3035mfp .)
56.XX ERROR To continue turn off then on A temporary printing error has occurred. Turn the device off, and then turn the device
on.
If this message persists, contact an HP-
authorized service or support provider. (See
the HP support flyer, or go to
www.hp.com/
support/LJM3027mfp or www.hp.com/
support/LJM3035mfp .)
57.X ERROR To continue turn off then on A temporary printing error has occurred. Turn the device off, and then turn the device
on.
If this message persists, contact an HP-
authorized service or support provider. (See
the HP support flyer, or go to
www.hp.com/
support/LJM3027mfp or www.hp.com/
support/LJM3035mfp .)
58.XX ERROR To continue turn off then on A temporary printing error has occurred. Turn the device off, and then turn the device
on.
If this message persists, contact an HP-
authorized service or support provider. (See
the HP support flyer, or go to
www.hp.com/
support/LJM3027mfp or www.hp.com/
support/LJM3035mfp .)
59.XY ERROR To continue turn off then on A temporary printing error has occurred. Turn the device off, and then turn the device
on.
If this message persists, contact an HP-
authorized service or support provider. (See
the HP support flyer, or go to
www.hp.com/
support/LJM3027mfp or www.hp.com/
support/LJM3035mfp .)
60.XX ERROR To continue turn off then on The tray specified by X is not lifting correctly. Follow the instructions in the onscreen dialog
box.
62 NO SYSTEM To continue turn off then
on A problem exists with the device firmware. Turn the device off, and then turn the device
on.
If this message persists, contact an HP-
authorized service or support provider. (See
the HP support flyer, or go to
www.hp.com/
support/LJM3027mfp or www.hp.com/
support/LJM3035mfp .)
64 ERROR To continue turn off then on A scan buffer error occurred. Turn the device off, and then turn the device
on.
If this message persists, contact an HP-
authorized service or support provider. (See
the HP support flyer, or go to
www.hp.com/
support/LJM3027mfp or www.hp.com/
support/LJM3035mfp .)
68.X Permanent storage full The device NVRAM is full. Some settings
saved in the NVRAM might have been reset
to the factory defaults. Printing can continue, Touch OK to clear the message. If the
message is not cleared, turn the device off,
and then turn the device on.
Table 11-1 Control-panel messages (continued)
ENWW Control-panel messages 157