HP Power Distribution Unit Management Module - Manual (Page 53)

HP PDR Management Module Service Menu 53
Web Access submenu
Option number Submenu Description
1 Protocol Selection Enables you to select HTTP or HTTPS
2 HTTP/HTTPS Configuration Enables you to configure the port for HTTP or
HTTPS
0 Previous Menu Returns to the previous menu
SNMP submenu
Option number Submenu Description
1 SNMP Managers (NMS) Enables you to select an entry to configure
the SNMP managers (computers that use the
HP Power MIB to request information from the
management module)
2 SNMP Traps Enables you to select an entry to configure
the SNMP traps receiver
0 Previous Menu Returns to the previous menu
SNMP Managers (NMS) submenu
Option number Submenu Description
1 IP Address Enables you to enter or change the IP
address of the SNMP manager
2 Read Community String Enables you to enter or change the Read
community string of the SNMP manager
3 Write Community String Enables you to enter or change the Write
community string of the SNMP manager
4 Access Privileges Enables you to enter or change access
privileges of the SNMP manager
5 Enable/Disable SNMP
Manager
Enables you to enable or disable the SNMP
manager
0 Previous Menu Returns to the previous menu
SNMP Traps submenu
Option number Submenu Description
1 Trap Receiver IP Address Enables you to enter or change the IP
address of a server that should receive SNMP
traps
2 Trap Community String Enables you to enter or change the
community strings of a server that should
receive SNMP traps
3 Enable/Disable Trap Enables or disables an SNMP traps receiver
0 Previous Menu Returns to the previous menu