Configuring global settings by using ilo rbsu – HP Integrated Lights-Out 3 User Manual
Page 89
4.
Select Network
→DNS/DHCP.
The Network Autoconfiguration screen appears, as shown in
Figure 40 Network Autoconfiguration screen
5.
View or update the following values, as needed:
•
DHCP Enable—Configures iLO to obtain its IP address (and many other settings) from a
DHCP server.
•
DNS Name—The DNS name of the iLO subsystem (for example, ilo instead of
ilo.example.com
).
This name can be used only if DHCP and DNS are configured to connect to the iLO
subsystem name instead of the IP address.
6.
Press F10 to save your changes.
7.
Select File
→Exit to exit iLO RBSU.
Configuring global settings by using iLO RBSU
1.
Optional: If you will access the server remotely, start an iLO remote console session.
You can use the .NET IRC or Java IRC.
2.
Restart or power on the server.
3.
Press F8 during POST to enter iLO RBSU.
4.
Select Settings
→Configure, and then press Enter.
The Global iLO 3 Settings menu opens, as shown in
.
Using the iLO RBSU
89