HP Integrated Lights-Out 3 - Manual (Page 29)

Figure 9 Access Settings – Language page
4. Click Browse (Internet Explorer or Firefox) or Choose File (Chrome) in the Upload Language
Pack section.
5. Select the downloaded language pack, and then click Open.
The following message appears:
Only one language pack is supported at a time. If a language pack
is already installed, it will be replaced with this upload. iLO will
automatically reboot after installing the new language pack. Are
you sure you want to install now?
6. Click OK to continue.
If you have a previously installed language pack, this language pack will replace it.
7. Click Upload.
iLO will automatically reboot after installing a language pack. This will end your browser
connection with iLO.
Wait at least 30 seconds before you attempt to re-establish a connection.
Selecting a language pack
After you have installed a language pack, you can select it in the following ways:
•
From the login page, as shown in Figure 10 (page 30) .
Using language packs 29