Using the ilo event log, Viewing the ilo event log – HP Integrated Lights-Out 3 User Manual
Page 106
To view drive information, navigate to the Information
→System Information page, and then click
the Drives tab. See
.
Figure 52 System Information – Drive Information page
The following information is displayed:
•
Firmware version
•
Drive bay number
•
Product ID
•
Drive status
•
Drive UID status
The UID lights can be toggled to help physically identify the drives. To toggle the UID light of a
drive, select the check box to the left of the Drive Bay number, and then click Toggle Drive UID.
Using the iLO Event Log
The iLO Event Log provides a record of significant events detected by iLO. Logged events include
major server events such as a server power outage or a server reset, and iLO events such as
unauthorized login attempts. Other logged events include successful or unsuccessful browser and
Remote Console logins, virtual power and power-cycle events, clearing the log, and some
configuration changes, such as creating or deleting a user.
iLO provides secure password encryption, tracking all login attempts and maintaining a record of
all login failures. The Authentication Failure Logging setting allows you to configure logging criteria
for failed authentications. The Event Log captures the client name for each logged entry to improve
auditing capabilities in DHCP environments, and records the account name, computer name, and
IP address.
Earlier versions of iLO firmware might not support events logged by later versions of iLO firmware.
If an unsupported firmware version logs an event, the event is listed as UNKNOWN EVENT TYPE.
You can clear the event log to eliminate these entries, or update the firmware to the latest supported
version.
Viewing the iLO Event Log
To view the iLO Event Log, navigate to the Information
→iLO Event Log page, as shown in
.
106 Using iLO