Axis Communications CD E100 User Manual
Page 66
Section 4: NetWare (NCP)
66
AXIS StorPoint CD E100 User’s Manual
DOS
When you are using DOS in NetWare, you use the
map
command to mount the
StorPoint CD. Follow these steps:
1. At the DOS prompt of a NetWare file server, type:
where
are the six last digits of your StorPoint CD serial number
and
is the StorPoint CD folder you want to map.
2. To make the connections permanent, edit your
autoexec.bat
file to include
your map commands.
Example 1 (Root level access):
To access the root level of your StorPoint CD with serial number
00408CCD000B under the drive letter E, type:
Example 2 (Volumes folder access):
To access all the discs of your StorPoint CD with serial number
00408CCD000B under the drive letter F, type:
Example 3 (Disc access):
If your StorPoint CD serial number is 00408CCD000B, and you want to
map a disc named 44018881 to drive G, type:
Note:
❏ If the Show All Volumes parameter is set to yes, individual discs can be
mapped at SYS level. Some applications will not run properly unless the
data is stored at root level. To avoid such problems, you can map drive G
directly to the volume named 44018881. Type:
Note:
❏ For more options, refer to the MAP command help.
map root
/
map root E:=AXISCD000B_NW/SYS:
map root F:=AXISCD000B_NW/SYS:VOLUMES
map root G:=AXISCD000B_NW/SYS:VOLUMES/44018881
map root G:=AXISCD000B_NW/44018881