Section 12 monitoring the storpoint cd, Event log, Section 12 – Axis Communications CD E100 User Manual

Page 111: Monitoring the storpoint cd

Section 12: Monitoring the StorPoint CD

AXIS StorPoint CD E100 User’s Manual

111

Section 12 Monitoring the StorPoint CD

This section describes the following monitoring tools:

Event Log

The event log is stored in the

logfile.txt

file located in the

System/ServerProperties

folder. In the event log, the StorPoint CD writes

information such as:

Information, e.g. completed tasks

Warnings, e.g. hard disk full

Errors, e.g. installation failures

To display the event log, follow these steps:

1. Start your Web browser, and enter the name or IP address of the StorPoint

CD in the location/address field.

2. Click admin. You will be prompted for the Server password. By default, this

is set to

pass

3. Click Event Log.

All events are viewed in the same order as they entered the log.

Notes:

❏ If a synchronization source has been found or if the correct date and time

have been set manually, date information will appear in the log file.

❏ When the server is restarted, a sub-set of critical events will remain in the

event log.

❏ Click Clear Event Log, to clear the event log of events.

Tools

See ...

Event log