Axis Communications CD E100 - Manual (Page 44)

Section 4: NetWare (NCP)
44 AXIS StorPoint CD E100 User’s Manual
Section 4 NetWare (NCP)
This section outlines the required configuration settings for running the
StorPoint CD in the Novell NetWare environment, how to set up access
restrictions and accessing the discs.
The StorPoint CD supports a maximum of 1000 users in NetWare.
If you intend to use StorPoint CD in a multiprotocol environment, proceed to
the other relevant sections in this manual, namely:
• “Section 3 - Microsoft & IBM Networks (SMB) ”
• “Section 5 - UNIX (NFS) ”
• “Section 6 - Macintosh (AFP) ”
• “Section 7 - FTP (File Transfer Protocol) ”
• “Section 8 - Web Browser (HTTP) ”
Network Settings
The StorPoint CD emulates both a 4.x and a 5.x NDS server and a NetWare 3.x
bindery server. It also supports NetWare/IP and PureIP. In NetWare 5
environments, the StorPoint CD can be integrated as any other 5.x server
simultaneously accessed via IPX, NetWare/IP and PureIP.
If your network supports TCP/IP, you can use the Administration Web pages to
configure the StorPoint CD.
NetWare Server
Name
The default NetWare server name is AXIS_NW, where
are the last six digits of the StorPoint CD serial number. This is the name that
will be presented to the NetWare clients on the network. You can change that
name by editing the NetWare Server Name parameter.
Recommendation! Choose a more descriptive name for your server, e.g. CDServer.
Time Synchronization Make sure you specify the time synchronization source properly. Refer to
“Date & Time” on page 25.