Axis Communications CD E100 - Manual (Page 107)

Section 11: Hard Disk Caching
AXIS StorPoint CD E100 User’s Manual 107
Manual Archiving Check the Archive checkbox to copy the disc to the hard disk. Unarchiving
a disc causes it to go back to the global setting mode.
Note:
❏ This checkbox only appears if there is a hard disk connected to the
StorPoint CD.
Properties Click the Properties icon to display the Properties dialog box where you
can set properties such as sharing options, user limits and access rights. Click
to set the access rights for the root or the volumes folder. Click to
set the access rights for the disc.
Eject Click to eject a disc. Note that the disc will be ejected even if the disc is
in use or the drive is locked. However, a message will be displayed if you try
to eject a disc that is currently in use.
Note:
❏ This function does not apply to changers.
Description Add a text describing the disc contents in the Properties dialog box. Display
this dialog box by clicking the Properties icon.
The Drives View Automatic archiving is managed from the Drives view.
SCSI Server - the Drive column lists all the drives by SCSI ID. In case of a Dual
SCSI server, A or B will be displayed to indicate which bus the drive is
connected to. If a LUN based device like a changer is attached, the LUN will
also be displayed. “A-6-0” indicates SCSI ID 6, LUN ID 0 on bus A.