Date&time – Axis Communications CD E100 User Manual
Page 25
Section 2: Installing the StorPoint CD
AXIS StorPoint CD E100 User’s Manual
25
Date & Time
1. On the Server Settings page, click the Server icon and then Change... to
open the Server Settings dialog box.
2. Open the Date & Time page.
3. Specify the time zone in which the StorPoint CD operates. Refer to
“Time Zone Parameter Values ” on page 122.
4. To set the time using a time synchronization source, choose Automatically and
specify the time source:
To set the time manually, choose Manually and specify the date in
yyyy-mm-dd
format, and time in
hh:mm:ss
format using the 24 hour clock.
5. Click Save to save your settings.
Network
environment
Time Source:
You must also specify the ...
NetWare IPX
Novell Directory
Services (NDS)
Time Source parameter on the Network
Settings | NetWare page:
- SAP or
- List of server names.
NetWare PureIP
NetWare/IP
Novell Directory
Services (NDS)
Time Source parameter on the Network
Settings | NetWare page:
- List of server names or IP addresses.
TCP/IP
Network Time
Protocol (NTP) *
NTP Server parameter on the Server
Settings | Date & Time page:
- Name or IP address of the time server.
Windows NT
domains
Microsoft Windows
NT Network (SMB)
* Note: NTP is not natively supported by Windows NT servers. You will need third party software.