HP RDX Removable Disk Backup System - Manual (Page 25)

Loading and unloading
Inserting cartridges
1. Insert a cartridge into the unit with the keyed corner facing the upper left corner of the RDX
Removable Disk Backup System. The cartridge fits in only one orientation. (The write-protect tab is
on the back right of the cartridge.)
2. Push the cartridge gently into the unit until it locks into place with a clicking sound.
1. write protect tab 2. keyed corner
Figure 12 Inserting a cartridge
Removing cartridges
There are two ways to eject a cartridge under normal operation.
If the eject function does not operate correctly, see “
Emergency eject ” on page 30.
Unload using the mouse right-click method (Windows™ only)
1. Locate the drive letter for the device in Windows Explorer.
2. Right click on the device and select Eject.
3. The RDX Removable Disk Backup System completes any task it is currently performing and ejects
the cartridge. When the cartridge has been ejected by the unit, grasp the exposed sides of the
cartridge and pull it straight out.
RDX Removable Disk Backup System 25