beautypg.com

Mounting bay, Mounting hardware, Hp storageworks rdx removable disk utility – HP RDX Removable Disk Backup System User Manual

Page 12: Using the hp storageworks cd-rom, 2 power requirements, Rdx removable disk utility

background image

For internal drives, the USB 2.0 connection is via an internal port on the server’s system board, which

may be a standard Type A connector or a 4–pin header cable.

What are the mounting requirements for an internal device?

Mounting bay

You need one industry-standard, 5¼-inch, half-height bay in which to install the HP RDX Removable Disk

Backup System. Power requirements are:

Table 2 Power requirements

Internal drive

External drive

Voltage

+5VDC ±5%

nl

+12VDC ±10%

+12VDC ±10%

Power consumption (Typical/Peak)

7.5W / 13W

6.6W / 13W

AC Adapter

N/A

Universal adapter, 100-240

VAC, 50-60Hz input

Mounting hardware

For many servers, no mounting tray or rails are required. Devices simply slide into the server’s chassis

and are fixed with screws. Other servers have built-in trays or rails.
Rail kits for a number of industry-standard servers may be available. For more details refer to:

http://www.hp.com/go/connect

.

Some servers use non-standard mounting rails and do not include spares. If this is the case with your

system, you will have to order these accessories from the server manufacturer before you can install the

RDX Removable Disk Backup System.

HP StorageWorks RDX Removable Disk utility

The CD-ROM supplied with your HP RDX Removable Disk Backup System contains a utility that enables

the Eject button and right-click eject method to operate correctly under the Windows operating system.

It should be installed immediately after you have connected the drive. This utility also contains basic

diagnostic tests.

Using the HP StorageWorks CD-ROM

The HP StorageWorks CD-ROM is a central source of information about your RDX Removable Backup

System with utilities for getting the best performance from your drive.
Use the HP StorageWorks CD-ROM to complete installation, as described in this guide, and to verify and

troubleshoot performance after installation. It helps you to:

Install the RDX Removable Disk utility which enables the eject function to operate correctly

Learn about your product

Register your product

Buy media online

Troubleshoot with the RDX Removable Disk utility

12

Before you start