HP Modular Cooling System - Manual (Page 36)

Serial interface 36
Serial interface
HP Modular Cooling System Utility overview
The HP Modular Cooling System Configuration Utility is used for entering network settings, accessing
controls, reviewing the details on the info page, and resetting to factory defaults.
First, log in to a terminal emulation program. ("
Logging in through the terminal emulation program " on page
31 ) After you have successfully initiated a terminal emulation session, the HP Modular Cooling System
Configuration Utility appears.
• Open a submenu by entering the corresponding option number at the prompt.
• Enter or change configuration information by following the onscreen prompts.
• Press Esc or enter 0 at the submenu prompt to go to the previous menu.
-or-
Press Esc or enter 0 at the main menu prompt to exit the utility.
• The management module must be reset before configuration changes can take effect.
Main menu