HP ProLiant DL120 G6 Server - Manual (Page 34)

Hardware options installation 34
7. Using a T-15 screwdriver, secure the drive to the chassis.
8. Connect the optical drive and power cable to the optical drive.
9. Connect the power connector to the power supply backplane.
10. Install the access panel.
11. Install the server into the rack.
Expansion board option
To install the component:
1. Power down the server (on page 15 ).
2. Remove the server from the rack (on page 15 ).
3. Remove the access panel (on page 16 ).
4. Disconnect all internal cables connected to any existing expansion boards.