Powering up and configuring the unit – HP Modular Cooling System User Manual
Page 12
Installation 12
10.
Guide the other ends of the power cords through the HP mc-Series 5042 Rack unit, and then plug them
into an appropriate power source.
11.
(Optional) Install the Automatic Door Release kit hardware. For more information, see the HP mc-Series
5042 Rack Options Installation Guide.
12.
If the rear extension is installed, this step is optional. Using two M6 trilobe flathead screws, secure the
two brackets to the MCS 5042 frame. For more details on how to install the brackets, see the HP
mc-Series 5042 Hook Up Kit Installation Guide.
13.
Align the access panel with the two brackets.
14.
Using two M6 flathead screws, secure the access panel to the brackets on the MCS 5042 unit frame.
Powering up and configuring the unit
This manual is related to the following products: