HP Deskjet 710c Printer User Manual
Page 9
9
Installing from the CD:
Windows 95, Windows 98, and Windows NT 4.0
6
Insert the CD into your CD-ROM drive.
After a few seconds, the HP DeskJet opening screen appears.
7
If the opening screen does not appear, do the following:
a. Click
Start
on the taskbar, and then click
Run
.
b. Type
d:\setup
and click
OK
.
If your CD-ROM drive is assigned to a letter other than “d”, type that
letter instead or browse to locate the CD-ROM drive.
8
When the opening screen appears, click
Install the HP DeskJet
710C Series Software
on your PC
and follow the instructions
on the screen.
If something goes wrong, see page 13.
9
When the installer instructs you to restart Windows, the installation
is almost complete. Remove the CD from your CD-ROM drive and
restart Windows.
If the “New Hardware
Found” dialog box
appears at any time
during the installation,
click in the upper-
right corner of the box.
or click Cancel.
Depending upon
the operating system
on your computer, your
boxes might differ from
the Windows 95 boxes
shown throughout
this document and
the user’s guide.
Windows NT 4.0 users:
You need to set the
HP DeskJet Printer as
the default printer. See