HP Deskjet 710c Printer - Manual (Page 57)

36
Banners
We encourage you to use HP Banner Paper for the very best results.
However, if you use computer or z-fold paper for your banners, we
recommend that you use 20-pound or 75 g/m
2 paper. Always do a good
job of fanning the paper before loading it.
Ẅ
In the HP print settings box, click the Setup tab and then click Banner. Then, in
the Paper Size box, select Letter or A4. (See page 9 for how to get to the HP print
settings box.)
ẅ
Flip the banner switch up.
The banner light goes on and the OUT tray lifts slightly, enabling the printer to
pick up the banner paper.
Ẇ
Remove all paper from the IN drawer.
Click Banner.
Flip the banner switch up.
Banner light on
Handy Hints
F OLLOW YOUR
SOFTWARE
The software program
you’re using might
require special settings
before it’ll print banners
correctly on your printer.
Check out the banner
information on either the
How do I? tab or on the
Troubleshooting tab
in the HP Toolbox for
information regarding
your specific software
program.
Paper Pointers
Y OUR BEST BET
If you use HP Banner
Paper, your banners will
print with fewer paper
jams and with brighter
color and denser blacks.
It’s easy to use, too—
you don’t have to
tear off those pesky
perforated strips! Look for
it at a large office supply
store, or call HP Direct
(see page 62).
B ANNER PAPER
THAT WON ’ T WORK
Avoid coated paper—for
example, paper that’s col-
ored on one side and not
the other.