HP XP Command View Advanced Edition Software User Manual

Page 151

Omission

Maximum
character
length

Description

Parameter

Specify the number of the RAID
Manager instance that is managing
Remote Copy in the cascade
configuration.
All of the Remote Copy copy groups
must be managed by this instance. If
you are using VSS to perform the
backup, the instance specified in this
parameter must be the same as the
instance that is being managed by
Application Agent.

INSTANCE_NUMBER

Enter the number of Remote Copy copy
groups in the cascade configuration.

COPY_GROUP_NUM

Enter the names of the Remote Copy
copy groups in the cascade
configuration.
You can specify this parameter more
than once (using one specification per
line). However, the number of times this
parameter is specified must match the
number of copy groups specified in the

COPY_GROUP_NUM

parameter.

COPY_GROUP

5
(The
maximum
value is
86400.)

Specify the timeout value for
configuration check processing at the
remote site as a value between

and

86400

(in seconds).

If you specify

, this processing does

not time out. If you omit this
specification,

3600

is assumed.

Only parameter values in sections that
are considered to be for the remote site
are used.
As a rule, set this value to roughly 1.5
times the period required to run the
backup command for the site at which
this parameter is specified when the

-cascade

option is not specified

(assuming all of the other options are
the same).

PREBACKUP_TIMEOUT

Application Agent CLI User Guide

151