HP XP Command View Advanced Edition Software User Manual

Page 149

•

A backup with a name identifying the generation specified

This section describes the system setup for each server.

Set the system environment variables for the file server or database server, as shown in the table
below.

Table 45 System environment variables required to use VSS (file server or database server)

Variable Description

System Environment

Specifies the instance number of the RAID Manager
that manages the primary volume used in VSS backup.
The specified value must be specified in the

HOR-

CMINST

parameter of the RAID Manager-linkage

definition file (

DEFAULT.dat

VSXPHORCMINST_LOCAL

Specifies the

MU#

(pair identifier) of the copy group

that uses VSS for backup.

VSXPHOMRCF_MUN

Specifies the installation drive for RAID Manager.
Specify the drive name and a colon (

) as shown

below.
For example, when installing RAID Manager in the D
drive, specify as follows:

VSXPRMDRV=D:

Note that when installing RAID Manager in the system
drive, you need not specify this value.

VSXPRMDRV

•

If you want to enable the system environment variables described in the above table, delete the
system environment variable

VSXPRMENVF

•

After setting the above system environment variables, restart the OS.

•

In a cluster environment, manage the primary volumes to be used in all virtual servers in a single
RAID Manager instance, and use the same instance number on all the physical nodes.

Set system environment variables for the backup server, as shown in the table below.

Table 46 System environment variables required to use VSS (backup server)

Description

System Environment Variable

Specifies the instance number of the RAID Manager
that manages the secondary volume used in VSS
backup. The specified value must be specified in the

HORCMINST