HP StorageWorks XP Remote Web Console Software - Manual (Page 133)

External Storage XP user guide 133
NOTE: In WWNs, X is an arbitrary number or character. Ports in the same apparatus have identical
values.
Path status and examples of recovery procedures (TagmaStore AMS and
TagmaStore WMS subsystems)
Table 20 shows the examples of recovery procedures when the path status is not normal. When the path
status is not normal, see ” Troubleshooting External Storage XP ” on page 121 and this table to recover the
path status. If you cannot restore the path, contact your HP account support representative.
Table 20 Path status and examples of recovery procedures (TagmaStore AMS and TagmaStore WMS
subsystems)
Path status Examples of recovery procedures
External device setting changed LUN Manager may have changed the LU paths’ settings.
Check the LU paths’ settings. If the LU paths’ settings changed, change the
settings back to the ones used when the volume was mapped. Or use
External Storage XP to perform the Delete LU operation, and perform the
Add LU operation again.
LUN Security XP Extension may have changed the volume’s access
attribute.
Check the volume’s access attribute. If the volume is protected by the
access attribute, release the protection.
Illegal request The volume may have been set as a pair volume for data copy.
Check if the volume is set as a pair volume for Business Copy XP,
Continuous Access XP, or another copy program. If the volume is set as a
pair volume, the volume might be protected because of the pair status. If
the volume is protected, change the pair status or delete the pair.
LUN Security XP Extension may have changed the volume’s access
attribute.
Check the volume’s access attribute. If the volume is protected by the
access attribute, release the protection.
Response error The volume may have been set as a pair volume for data copy.
Check if the volume is set as a pair volume for Business Copy XP,
Continuous Access XP, or another copy program. If the volume is set as a
pair volume, the volume might be protected because of the pair status. If
the volume is protected, change the pair status or delete the pair.
LUN Security XP Extension may have changed the volume’s access
attribute.
Check the volume’s access attribute. If the volume is protected by the
access attribute, release the protection.