HP StorageWorks XP Remote Web Console Software User Manual
Page 128
128 Notes on connecting external arrays
NOTE:
When using the Thunder 9500V subsystem as an external array, the following versions are
recommended. If you use a 9500V subsystem whose version is earlier than the following versions, the
SATA drive’s information might not be displayed correctly.
•
For Thunder 9530V, Thunder 9520V, Thunder 9570V: version 0658 or later
•
For Thunder 9580V, Thunder 9585V: version 1658 or later
Common 1
Delay Planned Shutdown
You can either specify this parameter or
omit specifying this parameter.
OPTION 1
SCSI Fibre Channel Common Options
You can either specify this parameter or
omit specifying this parameter.
OPTION 2
SCSI Fibre Channel Common Options
You can either specify this parameter or
omit specifying this parameter.
Data Striping
Operation if the processor failure occurs
Set this parameter to Reset of occurred.
Inquiry Setting
Command Queuing Mode
Set this parameter to ON.
Vendor ID
Keep this parameter as HITACHI (default),
and do not change.
Product ID
Keep this parameter as DF600F (default),
and do not change.
ROM Microprogram Version
You can either specify this parameter or
omit specifying this parameter.
RAM Microprogram Version
You can either specify this parameter or
omit specifying this parameter.
WEB Title
You can either specify this parameter or
omit specifying this parameter.
Port Type
Reset/LIP Mode
•
Reset/LIP Mode (Signal)
You can either specify this parameter or
omit specifying this parameter.
•
Reset/LIP Mode (Process)
You can either specify this parameter or
omit specifying this parameter.
•
LIP Reset Mode
You can either specify this parameter or
omit specifying this parameter.
Controller Option
RS232C Error Information Outflow Mode
You can either specify this parameter or
omit specifying this parameter.
Write and verify mode
Set this parameter to ON.
Host Connection Mode
Host Connection Mode 1
Set this parameter to Standard Mode.
Host Connection Mode 2
Specify HISUP Mode.
NOTE:
Do not specify any other
parameters.
Table 13
System parameter settings (Thunder 9500V subsystems) (continued)
Pane name
Parameter
Parameter setting