Avaya P334T-ML - Manual (Page 63)

Chapter 8 User Authentication
Avaya P334T-ML User’s Guide 47
Figure 8.1 SSH Session Establishment Process
SSH Commands
The following SSH commands are accessible from Supervisor level.
SCP Protocol Support
In addition to data transfer via an SSH session, the SSH protocol is also used to
support SCP for secure file transfer. When using SCP, the P330 is the client, and an
In order to... Use the following command...
Enable SSH and configure SSH
parameters ip ssh enable
Disable the SSH server no ip ssh
Display active SSH sessions on the
device. This command is only
available from the master module
switch context and from all router
contexts. show ip ssh
Disconnect an existing SSH session.
If an SSH session was entered from
the router, it can only be
disconnected from router mode. disconnect ssh
Generate an SSH host key pair crypto key generate dsa
SSH Client
SSH Server
Username
List
Host RSA
key
Hostnames
List
Establish Connection
Public Key and Encryptions List
Private Key and Encryptions List
Acknow ledgment (ACK)
User Passw ords
Initiate CLI Session
SSH Client Connection
User Authentication
Device Dom ain Host Dom ain