HP SmartStart-Software - Manual (Page 48)

Toolkit utilities 48
ConnectionName
This option is a user-defined string used as the connection name for the specified HBA.
The string can consist of:
• A maximum of 16 characters
• Embedded space characters but cannot end with a space character
• Any of the following characters: a–z, A–Z, 0–9, !, @, #, *, (, ), -, _, +, :, ., /, and [space]
HBA_WW_ID
This option specifies which HBA, based on its assigned WWN, is modified by the configuration changes.
HostMode
This option specifies the HostMode for a selected HBA. Setting the Host Mode optimizes the storage array
for the selected operating system. The available host modes for an HBA are device-specific. Not all
modes are available on all devices. Not all HBAs support a HostMode.
The following operating system options might be available:
• Default
• Microsoft® Windows®
• OpenVMS
• Tru64
• Linux
• Solaris
• Netware
• HP-UX
ACU scripting error messages
Error code Error message Comment or clarification
1 General error. The ACU process cannot be initiated. You might see this error
message if you are not authenticated to use ACU or if ACU is
already running.
268 Error saving controller. ACU cannot save one or more controller configurations.
278-282 Controller is locked by
another machine or user.
—
290 Error communicating with
controller.
—
516 Internal error. An error occurred during the configuration process, but ACU
cannot identify the error because there is an internal ACU
error.
1052 Array requires an odd
number of drives. This error message occurs if you attempt to add an odd
number of drives to an array that has RAID 1 logical drives,
and the controller does not support RAID-level migration.