HP SAN Virtualization Services Platform - Manual (Page 70)

Show voltage
command
Returns the nominal and actual voltages for the DPM. The nominal voltage is the expected voltage
when everything is operating correctly. The actual voltage is the current voltage.
Syntax
show voltage
[voltage number]
*
Keyword values
voltage number
An integer between 1 and 15 inclusive, that is the location in the DPM circuitry where the voltage is
measured. Used by support personnel as a diagnostic tool.
* indicates all voltages in the DPM.
See also
“ Show voltages command ” on page 70
Show voltages
command
Returns the nominal and actual voltages for the DPM. The nominal voltage is the expected voltage
when everything is operating correctly. The actual voltage is the current voltage.
Syntax
show voltages
See also
“ Show voltage command ” on page 70
Shutdown
command
Powers off the DPM.
Syntax
shutdown
Version
command
Returns the DPM version.
CLI commands 70