HP SAN Virtualization Services Platform - Manual (Page 63)

Show ntp
command
Displays the status of NTP for all regular and broadcast messages. Also shows the NTP server name
and state of the NTP service.
Syntax
show ntp
See also
“ Disable ntp command ” on page 28
“ Enable ntp command ” on page 33
“ Modify ntp command ” on page 41
“ Restart ntp command ” on page 48
Show port
command
Returns diagnostic and status information for ports 0–15 on the DPM. See the sample output in the
Examples section below for more information.
Syntax
show port
[port number]
*
Keyword values
[port number]
An integer 0–15 to indicate the DPM Fibre Channel port.
* indicates all Fibre Channel ports on the DPM.
Examples
Here is a sample output for port 1 on a system after running show port 1.
Port1:
WWPN: 5000-XXXX-XXXX-XX21
State: LINK-ESTABLISHED
Capability: ['FCP_INITIATOR']
Type - Configured: FABRIC Actual: FABRIC
Speed - Configured: NEGOTIATE Actual: 4G
Class - Configured: ['THREE']
Max Frame Size (in bytes): 2048
License: YES
See also
“ Disable port command ” on page 28
HP StorageWorks SAN Virtualization Services Platform Data Path Module user guide 63