HP SAN Virtualization Services Platform - Manual (Page 40)

Syntax
modify date [MM/DD/YYYY hh:mm:ss]
Keyword values
[MM/DD/YYYY hh:mm:ss]
MM/DD/YYYY is the month, day, and year for the system time (year must be 4–digits long). hh:mm:ss
is the hours, minutes, and seconds for the system time.
Notes
Once the time zone is set, the system automatically switches between Standard Time and Daylight
Saving Time.
See also
“ Modify timezone command ” on page 45
“ Show date command ” on page 54
Modify eth
command
Configures the Ethernet properties—IP address, gateway, and subnet—for the specified Ethernet
interface.
Syntax
modify eth [interface name] [family]
address [IP address] | gateway [gateway address] | netmask [subnet
mask]
Keyword values
At least one of the optional keywords is required:
[interface name]
Ethernet interface that you are modifying: MGMT, GE1, GE2, or GE3.
[family]
IPv4, IPv6
address [IP address]
IP address of the interface.
gateway [gateway address]
IP address of the network gateway.
netmask [subnet mask]
Mask bits for subnet routing.
CLI commands 40