HP SAN Virtualization Services Platform - Manual (Page 65)

Show ps
command
Returns the status (Error or OK) and voltage information for the specified power supply. The DPM
arrives with two power supplies already installed.
Syntax
show ps
[power supply number]
*
Keyword values
[power supply number]
1 or 2.
* indicates both power supplies.
Notes
When looking at the fan side of the DPM, power supply 1 is on the right side, and power supply 2
is on the left side.
See also
“ Show pss command ” on page 65
Show pss
command
Returns the status (Error or OK) and voltage information for each of the two power supplies on the
DPM.
Syntax
show pss
Notes
When looking at the fan side of the DPM, power supply 1 is on the right side, and power supply 2
is on the left side.
See also
“ Show ps command ” on page 65
Show rport
command
Displays information for all ports matching the partial value of the WWPN specified.
HP StorageWorks SAN Virtualization Services Platform Data Path Module user guide 65