HP SAN Virtualization Services Platform - Manual (Page 39)

See also
“ Modify factory command ” on page 41
“ Show factory command ” on page 59
Modify chassis
command
Allows the user to set values for the DPM's name, location, WWNN, maxframesize, and rank values.
Syntax
modify chassis location [location]
modify chassis maxframesize [maxframesize]
modify chassis name [new-name]
modify chassis rank [new-rank]
modify chassis wwnn [new-wwnn]
Keyword values
[location]
An arbitrary location code provided by the administrator.
[maxframesize]
Maximum size of a Fibre Channel frame that can be sent or received by this DPM. Typically 2 k,
should be set to the smallest frame size of any connected device.
[new-name]
Host name for this DPM.
[new-rank]
Controller rank for this DPM, such as “Primary” or “Secondary.”
[new-wwnn]
The Fibre Channel world wide node name for this DPM.
Examples
modify chassis location “Second floor lab, Main Street office”
modify chassis maxframesize 1024
See also
“ Show chassis command ” on page 53
Modify date
command
Sets the system date and time.
HP StorageWorks SAN Virtualization Services Platform Data Path Module user guide 39