HP SAN Virtualization Services Platform - Manual (Page 51)

Comma-separated list of types to be set.
Examples
show debug modules fcpt returns:
fctp=err (newcmd,iocomp,tmf,abts,puntrsp,quefull,rsp,dump)
set debug fcpt level warning
sets the fctp module level value to warning.
show debug modules fcpt would now show:
fctp=warning (newcmd,iocomp,tmf,abts,puntrsp,quefull,rsp,dump)
set debug fcpt type tmf,dump level crit sets the types tmf and dump in fcpt to have
debug levels of crit.
show debug modules fcpt would now show:
fctp=warning/tmf,dump=crit (newcmd,iocomp,abts,puntrsp,quefull,rsp)
set debug fcpt level info sets the fsct module level value to info.
show debug modules fcpt would now show:
fctp=info/tmf,dump=crit (newcmd,iocomp,abts,puntrsp,quefull,rsp)
reset debug level fcpt resets the fcpt debug levels to the original values.
show debug modules fcpt would now show:
fctp=err (newcmd,iocomp,abts,puntrsp,quefull,rsp,dump)
See also
“ Create debug command ” on page 22
“ Load debug command ” on page 38
“ Reset debug command ” on page 47
“ Save debug command ” on page 50
“ Show debug command ” on page 55
“ Watch debug command ” on page 71
Set eth
command
Changes the Ethernet family address resolution method, duplex, and link speed for the specified
Ethernet interface.
Syntax
set eth [interface name] link [auto | duplex | speed
speed>]
or
set eth [interface name] [family] [method]
Keywords and values
Description of keywords:
HP StorageWorks SAN Virtualization Services Platform Data Path Module user guide 51